Press, Press Machine, C-Frame Press, Servo Press, Straight Side Press, Door-type Press, High Speed Precision Press, Knuckle Press, Forging,Forging and Press,Cold Forging Press, Hot Forging Press, Automatic auxiliary equipment, Metal Plate, Transfer Press, Machine Tool, Connecting Rod, Machine, Digit Press, Precision

Straight Side, 4-point, Link Drive Press : Tandem Metal Plate Press line

Straight Side, 4-point, Link Drive Press : SL4 Series

Straight Side, 4-point, Link Drive Press

The automatic production line is widely used in the main machinery factory, especially in the production of automobile large panel: four doors, two covers, left and right fenders, left and right side wall, roof cover, etc. During the course of the continuous warming up of the automobile industry and new energy vehicles, automobile manufacturers have a higher requirement on the press production line in the area of speed and quality. More and more main machinery factory require to achieve the whole line speed of more than 15times for the high-speed line, and increasingly compress the ADC time and keep the stability of the whole line. The production environment of workers is getting more and more attention, and the future production line must also have the characteristics of low noise, low pollution, more safety and Intellectualization.

E-Catalog

Technical Parameters		SL2-600	SL2-800	SL2-1000	SL2-1200	SL2-1600	SL4-800	SL4-1000
Drive Method		Multi-link	Multi-link	Multi-link	Multi-link	Multi-link	Multi-link	Multi-link
Capacity	KN	6000	8000	10000	12000	16000	8000	10000
Rated Tonnage Point	mm	13	13	13	13	13	13	13
Stroke Length	mm	700/800	900	900	900	900	900	1000
Stroke Per Minute	SPM	8~18	8~18	8~18	8~18	8~18	8~18	8~18
Max.Upper Die Height	mm	900	1200	1200	1200	1200	1200	1400
Upper Die Height Adjustment	mm	450	500	500	500	500	500	500
Bolster Dimension（LR*FB）	mm	2700*1800	3700*1800	4000*1800	4000*1800	4000*1800	3700*2000	3700*2000
Slide Bottom Dimension（LR*FB）	mm	2700*1800	3700*1800	4000*1800	4000*1800	4000*1800	3700*2000	3700*2000
Cushion	Type	Air	Air	Air	Air	Air	Air	Air
Cushion Capacity	Ton	200	200	250	300	300	200	250
Stroke Length	mm	250	250	350	300	300	250	250
Moving Bolster(MB)	Moving Method	LR move out	LR move out	LR move out	LR move out	LR move out	LR move out	LR move out
Load Bearing	Ton	20	35	35	40	40	40	50
Moving Speed	mm/min	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~13	1.5~12
Rigidity		≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000
Height Above Floor	mm	Approx.7500	Approx.8350	Approx.9400	Approx.10200	Approx.10900	Approx.8350	Approx.8350
A.D.C. for the line	S	90~300	90~300	90~300	90~300	90~300	90~300	90~300
Note: The technical parameters in this table are CFC basic parameters . Users can make appropriate modifications or other choices according to the specific process requirements.

Technical Parameters		SL4-1200		SL4-1500	SL4-1800	SL4-2000		SL4-2400
Drive Method		Multi-link	Multi-link	Multi-link	Multi-link	Multi-link	Multi-link	Multi-link	Multi-link
Capacity	KN	12000	12000	15000	18000	20000	20000	24000	24000
Rated Tonnage Point	mm	13	13	13	13	13	13	13	13
Stroke Length	mm	700	1000	1100	1100	1200	1400	1400	1400
Stroke Per Minute	SPM	8~18	8~18	8~18	8~18	8~18	8~18	8~18	8~18
Max.Upper Die Height	mm	1400	1400	1500	1500	1500	1600	1500	1600
Upper Die Height Adjustment	mm	500	500	500	500	500	500	500	500
Bolster Dimension（LR*FB）	mm	3700*2000	4000*2500	4000*2300	4500*2400	4600*2400	4600*2400	4600*2400	5000*2500
Slide Bottom Dimension（LR*FB）	mm	3700*2000	4000*2500	4000*2300	4500*2400	4600*2400	4600*2400	4600*2400	5000*2500
Cushion	Type	Air	Air	Air	Air	Air/Hyd.	Air/Hyd.	Air/Hyd.	Air/Hyd.
Cushion Capacity	Ton	250	250	300	350	450	450	450	450
Stroke Length	mm	300	300	300	300	350	350	350	350
Moving Bolster(MB)	Moving Method	LR move out	LR move out	LR move out	LR move out	LR move out	LR move out	LR move out	LR move out
Load Bearing	Ton	40	55	55	55	60	60	60	60
Moving Speed	mm/min	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12
Rigidity		≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000
Height Above Floor	mm	Approx.10200	Approx.10500	Approx.10700	Approx.11200	Approx.11500	Approx.11500	Approx.11500	Approx.11500
A.D.C. for the line	S	90~300	90~300	90~300	90~300	90~300	90~300	90~300	90~300
Note: The technical parameters in this table are CFC basic parameters . Users can make appropriate modifications or other choices according to the specific process requirements.