Press, Press Machine, C-Frame Press, Servo Press, Straight Side Press, Door-type Press, High Speed Precision Press, Knuckle Press, Forging,Forging and Press,Cold Forging Press, Hot Forging Press, Automatic auxiliary equipment, Metal Plate, Transfer Press, Machine Tool, Connecting Rod, Machine, Digit Press, Precision

Straight Side, 4 Point, Eccentric Gear Press : Tandem Metal Plate Press line

Straight Side, 4 Point, Eccentric Gear Press : S4 Series

Straight Side, 4 Point, Eccentric Gear Press

The automatic production line is widely used in the main machinery factory, especially in the production of automobile large panel: four doors, two covers, left and right fenders, left and right side wall, roof cover, etc. During the course of the continuous warming up of the automobile industry and new energy vehicles, automobile manufacturers have a higher requirement on the press production line in the area of speed and quality. More and more main machinery factory require to achieve the whole line speed of more than 15times for the high-speed line, and increasingly compress the ADC time and keep the stability of the whole line. The production environment of workers is getting more and more attention, and the future production line must also have the characteristics of low noise, low pollution, more safety and Intellectualization.

Technical Parameters		S4-500		S4-600		S4-800		S4-1000
Drive Method		Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type
Capacity	KN	5000	5000	6000	6000	8000	8000	10000	10000
Rated Tonnage Point	mm	13	13	13	13	13	13	13	13
Stroke Length	mm	600/800	600/800	600/900	600/900	600/1000	600/1000	800/1100	1100/1300
Stroke Per Minute	SPM	8~20	8~20	8~20	8~20	8~18	8~18	8~18	8~18
Max.Upper Die Height	mm	800	1200	1000	1200	1100	1300	1200	1400
Upper Die Height Adjustment	mm	400	600	500	600	550	650	600	650
Bolster Dimension（LR*FB）	mm	3500*2000	4000*2200	3500*2000	4000*2200	3500*2000	4000*2300	3700*2200	4600*2400
Slide Bottom Dimension（LR*FB）	mm	3500*2000	4000*2200	3500*2000	4000*2200	3500*2000	4000*2300	3700*2200	4600*2400
Cushion	Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type
Tonnage	Ton	120	120	120	120	150	150	200
Stroke Length	mm	0-200	0-200	0-200	0-200	0-200	0-200	0-250
Moving Bolster(MB)	Moving Method	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type
Load Bearing	Ton	20	25	20	25	25	35	30	40
Moving Speed	mm/min	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12
Rigidity		≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000
Height Above Floor	mm	6872	8226				8321	11425
Note: The technical parameters in this table are CFC basic parameters . Users can make appropriate modifications or other choices according to the specific process requirements.

Technical Parameters		S4-1200			S4-1600			S4-2000
Drive Method		Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type	Eccentric Gear Type
Capacity	KN	12000	12000	12000	16000	16000	16000	20000	20000	20000
Rated Tonnage Point	mm	13	13	13	13	13	13	13	13	13
Stroke Length	mm	900/1100	900/1100	1300	900/1100	900/1100	1300	900/1100	900/1100	1300
Stroke Per Minute	SPM	8~18	8~18	8~18	8~18	8~18	8~18	8~18	8~18	8~18
Max.Upper Die Height	mm	1300	1300	1300	1300	1300	1300	1300	1300	1300
Upper Die Height Adjustment	mm	650	650	650	650	650	650	650	650	650
Bolster Dimension（LR*FB）	mm	4000*2000	4600*2500	5000*2500	4000*2300	4600*2500	5000*2500	4000*2300	4600*2500	5000*2500
Slide Bottom Dimension（LR*FB）	mm	4000*2000	4600*2500	5000*2500	4000*2300	4600*2500	5000*2500	4000*2300	4600*2500	5000*2500
Cushion	Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type	Air Pressure Type
Cushion Capacity	Ton	300	300	300	350	350	350	350	350	350
Stroke Length	mm	0-300	0-300	0-300	0-350	0-350	0-350	0-350	0-350	0-350
Moving Bolster(MB)	Moving Method	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type	FR/LR/T-Type
Load Bearing	Ton	35	50	50	40	50	50	40	50	50
Moving Speed	mm/min	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12	1.5~12
Rigidity		≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000	≦1/8000
Height Above Floor	mm
Note: The technical parameters in this table are CFC basic parameters . Users can make appropriate modifications or other choices according to the specific process requirements.

S4 SeriesSeriesProduct feature

4 or 5 online for the whole line
Max. Production S.P.M.: 15-18pcs/min /min
Double moving bolster, ADC time within 90-180seconds
The first press is equipped with air cushion
The whole line is closed and fully automatic
Production mode: intermittent or continuous
Intellectualization

S4 SeriesApplication field

Automobile Parts

返回上一页

S4 Series

Product describtion